HOME |  ABOUT US  |  SEARCH  | CONTACT   

 

Overview
Benefits
Technical Forum
Newsroom
Tradeshows
   

 PORCERAX II MENU

Unique Characteristics

Benefits

General Properties

Post-Machining Treatments

Water Line Sealing

Design Guidelines

Cleaning, Maintenance, and Resin Removal

Porcerax II Insert Installation

Porcerax II Pin Installation

Porcerax II Stock List

  

 

 ABOUT PORCERAX II
 

Porcerax II Stock List

Porcerax II Rounds (7 micron and 20 micron)
International Mold Steel offers the following sizes of Porcerax II in round bar:

¼” OD x 4”

$160.00

3/8” OD x 7”

$295.00

½” OD x 8”

$390.00

5/8” OD x 8”

$470.00

¾” OD x 8”

$575.00

1” OD x 8”

$795.00

All rounds are +.010 / .020 and will only be sold in full length pieces.

7 Micron and 20 Micron
Rectangles are cut from a master block approximately 8" x 12" x 27"


IMPORTANT WARNING:
It is imperative that anyone coming into contact with Porcerax II during the mold building or molding operations understand the characteristics and sensitivity of this material. Any questions should be directed to International Mold Steel at 1-800-625-6653.

< PREVIOUS  |  HOME

NOTE: All technical and engineering data and suggested procedures, specifications and applications contained in this publication are for general information only. Sintokogio, Ltd. International Mold Steel and/or their distributors disclaim any and all express or implied warranties of merchantability, suitability for any particular purpose or use, or freedom from infringement of any patent, trademark or copyright. Porcerax II® is a registered trademark of International Mold Steel, Inc. and Sintokogio, Ltd.

                       HOME  |  ABOUT US  | SEARCH  |  CONTACT US 1-800-625-6653
International Mold Steel, Inc. is a licensed distributor of Porcerax II, a SINTOKOGIO,LTD. product. International Mold Steel, Inc.  
6796 Powerline Drive
Florence, KY  41042  USA
Tel: (859) 342-6000 or  1-800-625-6653   
Fax: (859) 342-6006 
Literature: info@imsteel.com
Sales Desk: salesdesk@imsteel.com

Copyright 2006-2017 International Mold Steel, Inc
Web site published by Marketing Options, LLC